Vicon V960B-IR312 Guida di Installazione

www.vicon-security.com XX224-70-05V960B Series Network Bullet CamerasVicon Industries Inc. does not warr

3.2 Accessing the Camera from the Internet Once installed, the camera will be accessible on the Local Area Network (LAN). Then you must configur

3.4 Live View Client PC Speaker (enable/disable) Client PC Microphone (enable/disable) Digital Zoom Snapshot Full Screen Vide

Multicasting is bandwidth-conserving technology that reduces bandwidth usage by simultaneously delivering a single stream of information to multiple n

4. Setup The V960B is configured from the Setup tab, which is available on the upper-left hand side in the web interface. This configuration could b

5. Installation The following descriptions show examples of some of the features available with V960B. 5.1 Installation Mode Installation Mo

6. Video The following descriptions show examples of some of the features available with V960B. 6.1 Video Codec This section allows you to cho

Size Video output resolution. See below for camera resolution tables. Frame Rate 2.5 ~ 30fps in normal mode (1 ~ 30fps in slow shutter mode)

Bandwidth Limit Limit the bandwidth that the V960B can use during a network connection. Max Bandwidth Specify the maximum bandwidth that the V96

6.2 Camera This section allows you to adjust various camera settings. 6.2.1 Exposure Control Exposure Mode Select AUTO (indoor) for

Slow Shutter Mode For low light conditions, turn ON slow shutter mode. Max AGC Gain For low light conditions, select HIGH value; otherwise select LOW.

Contents 1. Product Features ... 3 2. Installation ...

6.2.5 Motorized Lens Adjustment Adjust the lens (Zoom, Focus and Iris, if applicable) from this window. One Push Focus: Camera will automatically

Audio Input Audio from a connected line-in source can be connected to the Audio in connector on the V960B camera. If there are problems with the sou

9. SD Card 9.1 Configuration SD Card Configuration This configuration page allows you to save video and still images to the Micro SD (S

9.2 Event Event SD Writing You can configure the camera to store still images based on events such as Alarm In and Motion detection. NOTE:

SD Write Mapping Choose which types of events (Alarm In or Motion) will be recorded to the SD card by checking the desired event. Effective Perio

10. FTP 10.1 Configuration Server Configuration Enable/Disable the FTP function to download saved content from the SD Card remotely. Wh

Event FTP Sending Allows transmission of still images to the FTP server at remote sites when an event occurs. NOTE: This function cannot be used

11. Event 11.1 Alarm Port Alarm Input (dry contact) Used for connecting external alarm contacts and triggering specific alarm-based events. T

11.2 Motion Motion Detection Motion detection is used to generate an alarm whenever movement occurs within the video image. A total of 4 moti

11.3 Mapping Event Mapping It is possible to define conditions that would cause the camera to respond with certain actions. A triggered event h

11.2 Motion ... 27 11.3 Mapping ...

12. Network 12.1 IP Setup IP Address Configuration The V960B supports both IP version 4 and IP version 6 (IPv6 will be supported as of

How to Assign an IP Address Default setting is set to “DHCP” and “UPnP” function is set to ON. If your network has a DHCP server and the UPnP functi

12.2 Service Port Service Port HTTP Port The default HTTP port number (80) could be changed to any port within the valid port range (1-655

12.3 RTP RTP Port Range The IP address, port numbers, and Time-To-Live (TTL) value are for use for the video stream(s) in Multicast H.264 f

You must turn Notification to ‘ON’ and then enter the host names or addresses for your mail servers in the fields provided to enable the sending of e

The Dynamic Domain Name Service (DDNS) can provide your camera with its own name server address (URL), which can then be used to access it over the In

In order to be able to detect the camera automatically, you must enable the UPnP function on both the camera and on your PC. Camera : Set UPnP to “

13. System 13.1 User When you access the camera, the Configure Root Password dialog box appears. Enter the user name ADMIN and password 1

12.2 Date & Time Date & Time Format Specify the formats for the date and time (12h or 24h) displayed in the Live View video streams.

1. Product Features The V960B Series HD/Megapixel IP camera dome is a high performance H.264 network camera, designed for demanding security insta

13.3 Maintenance System Name Choose a system name to identify the camera when using e-mail notifications. System Reboot Reboots the camera

4. If you suspect the firmware upgrade for the camera has failed, always wait at least 5-10 minutes before restarting the upgrade process. 5. Vico

13.4 Information System Information After updating firmware, you can confirm the new F/W version here.

Vicon Standard Equipment Warranty Vicon Industries Inc. (the “Company”) warrants your equipment to be free from defects in material and workmanship

Vicon Industries Inc. Corporate Headquarters 89 Arkay Drive Hauppauge, New York 11788 631-952-2288 800-645-9116 Fax: 631-951-2288 Vic

1. Network Connector The V960B connects to the network via a standard network cable and automatically detects the speed of the local network segme

5. Power Connector 12 VDC or 24 VAC power connector 6. Micro SD Card Save snapshot images and video onto a Micro SD card. 7. Reset Button P

2. Installation Select a location for the installation of the V960B camera. Be sure the area around the selected location is clear of obstacles (su

2.1 Adjusting the Camera Direction The camera body is set with bracket movement. Loosen the set screws to adjust camera view. Secure the set screws.

When you first access the camera you will be asked to download and install an Active X control from the camera to display a Live image.