Product Specifi cation
Model No:
SurveyorVFT
Product Code:
See Table 1
SEC: 3
SPEC:
V134-25
REV:409
Vicon Product Facts
Product specifi cations subject to change without notice.
1
Vicon part number 8009-7134-25-05
IP High-Performance Camera Dome
State-of-the-art IP Camera Dome transmits high quality ■
video across the network for remote viewing and record-
ing
Powered by ViconNet Version 5 software ■
Maximum video transmission rate of 30 fps (25 fps PAL) ■
at 720 x 488 pixels (864 x 586 PAL)
Uses optimized proprietary compression based on ■
MPEG-4 that maximizes data size and picture quality
Simultaneous transmission of multiple channel video ■
across the LAN and WAN (Internet) to connected Kollec-
tor Elite recorders and ViconNet workstations
Can be remotely confi gured from Kollector Elite record- ■
ers and ViconNet workstations
Up to 10 simultaneous viewing/recording streams per ■
camera dome
Museum Search (Smart Search) feature scans hours of ■
video in minutes
MD5 algorithm video authentication ensures data ■
integrity
Password protection for confi guration ■
Lowest current draw in its class ■
On-board memory retained in housing; designed for ■
easy installation and servicing
360° continuous rotation pan-and-tilt drive with a variety ■
of color domes available
Color 22X, 22X with ExView ■
TM
and day/night 23X and 35X
camera options, maximum 420X optical/digital zoom
EIS (image stabilizer) on 35X model ■
Wide Dynamic Range (23X and 35X) provides best con- ■
trast for high quality images
High-resolution in 23X and 35X versions (540 TVL) ■
23X version provides Digital Noise Reduction (DNR) and ■
enhanced sensitivity
Enhanced autofocus ■
Indoor or outdoor, ceiling or pendant confi gurations ■
Outdoor version provides environmental protection, ■
pressurized (PRS) and maximum security (M) versions
available
The SurveyorVFT™ IP Camera Dome is a powerful IP video
source for a complete digital video management system based
on ViconNet
®
. It is fully compatible all ViconNet systems and
is remotely managed and controlled from ViconNet worksta-
tions and Kollector
®
Elite recorders. It can deliver up to 30 fps
at a nominal bandwidth of 1.7 Mbps at Q5 (360 x 244 pixels).
A pre-installed 100 Mbps network interface board allows direct
plug-in to a system network switch. Images received from the IP
dome can be displayed, recorded or archived like any other Vicon-
Net video component using the ViconNet management platform.
The SurveyorVFT IP dome has 4 levels of video resolution; 4 CIF
or D1, 2 CIF, CIF and HCIF with 2 levels of compression. CIF and
HCIF with 2 levels of compression; Normal (optimized MPEG-
4) and Full (JPEG). These comprise 8 selectable quality levels.
The SurveyorVFT IP dome utilizes an MD5 type video authentication
algorithm which is based on a 128-bit message used to identify data integ-
rity. Viewing authenticated video can be confi gured from the software.
In addition, the IP dome supports control, alarm reporting, macros
and alarm confi guration.
The SurveyorVFT IP dome is designed for easy snap-in instal-
lation. The drive simply snaps into the housing. When removed,
the housing retains all programmed functions in its on-board
memory. The customer interface board snaps down for easy
access and the PCB provides removable terminal blocks for
simple wiring connections. The SurveyorVFT has one of the
lowest current draws compared to other domes in its class.
SurveyorVFT IP Camera Dome System is a compact, light-
weight and intelligent security device comprised of a cam-
era, pan/tilt drive, receiver and CPU-based electronics all in
an attractive and covert enclosure. It is available in a variety
of indoor and outdoor versions and can be confi gured with
a variety of camera and lower dome types. Refer to Table 1.
There are four camera types available, each with NTSC and PAL
versions. The basic model is a 22X high-resolution camera/lens
(CA in the model number). Another 22X model is available with Ex-
View CCD technology (22XEX). The third version is a 23X day/night
camera/ lens and the fourth is a 35X day/night camera/lens. The
day/night models feature wide dynamic range (WDR). See Techni-
cal Information and Table 3 for camera features. Several mounting
accessories are available to fi t almost any installation need. Refer to
Table 1 for specifi c SurveyorVFT IP models and mounting options.
There are 79 programmable preset positions, each having a vari-
able preset solve accuracy of 0.1º. Programmable azimuth and
compass is displayed on screen. There are 8 compass headings (N,
NE, E, SE, S, SW, W, NW) (22XEX/23X/35X only) and pan and tilt
degrees displayed with a 1º resolution. 16 individual programmable
privacy masks are available. Motion detection capability is avail-
able on day/night models. For each preset, there are 6 program-
mable zones for motion detection, each having 3 sensitivity levels.
Commenti su questo manuale